Replace Your Old Hangers with New Double Traverse Rods

Even though enhancing their living rooms, people generally choose to set up curtain rods that could seamlessly match with all the all round decor in the home. Today, you will find various types of rods available. You are able to either want to purchase straightforward Decorative Curtain Rods or traverse curtain rods that come with a pulley method, which makes it simple to open and close the drapes by just pulling the wand. Some of the hardware of those rods operates by means of a side draw whereas other people make use of center draw.

The layout on the drapes even though making use of these rods will be such that an S-shaped pin attaches for the pleats in your drapes having a Curtain Hook finish that may be noticed via the small hole in the hanger. Considering that the hangers utilized are created of plastic, they can break or wear out effortlessly when exposed to sun or with the passage of time. Even so, these hangers usually are not extremely expensive and can be simply bought and installed in just several minutes time. Once they develop of their age, it is possible to replace them to initiate a proper functioning of the rods and curtains.

This short article discusses methods via which you can replace your old, worn-out hangers with new ones.

Regardless of whether you're using single or double traverse rods, it really is initial required for you personally to detach the panels in the drapes in the corner on the bracket to expose the traverse rod on the side which has the Curtain Hangers broken. By lifting the hooks, continue to remove the drapes from the corner of bracket.

After you happen to be completed with their removal, now detach the hooks in the hangers and set the drape in one particular side to expose the hardware, rod and ring hangers. To avoid the loss of any pins, which may well be stuck in the seams of the pleats, fold the drapes and keep them aside. However, if you believe that your curtains need some cleaning, carefully get rid of the hooks and in the pleats.

The next step is usually to unlock the rod, which can be done by pressing down the tab around the pulley located on the either side from the rod. This step aids you to easily slide sling hanger off the rod. Now slide the hanger more than the housing and by way of the hole offered, lift it out very carefully.

By way of the open end, get rid of the broken plastic hangers and replace them with new ones. Now match the new hangers by means of the end of the rod and also the slot. Just ensure that the hanger faces in the forward direction.

As soon as the complete process is over, reattach the drapes or curtains around the traverse rods by inserting the hook end in the s-shaped pin, which can be noticed on the backside in the pleated drapes.

The identical approach could be followed with extra-long traverse rods. Even so, be cautiously whilst reattaching the drapes because the s-shaped hooks includes a sharp pointed finish, which can get poked in your finger.