Replace Your Old Hangers with New Double Traverse Rods

Even though enhancing their living rooms, individuals normally prefer to set up curtain rods that will seamlessly match with the overall decor on the residence. Presently, there are different designs of rods obtainable. You'll be able to either want to purchase straightforward Decorative Curtain Rods or traverse curtain rods that come with a pulley program, which makes it easy to open and close the drapes by just pulling the wand. A number of the hardware of those rods operates through a side draw whereas others make use of center draw.

The layout of the drapes while employing these rods will be such that an S-shaped pin attaches to the pleats in your drapes with a Curtain Hook end that may be noticed by way of the tiny hole inside the hanger. Since the hangers used are produced of plastic, they can break or wear out very easily when exposed to sun or together with the passage of time. Nonetheless, these hangers are not extremely pricey and can be effortlessly purchased and installed in just a couple of minutes time. When they develop of their age, you can replace them to initiate a proper functioning of one's rods and curtains.

This article discusses strategies by means of which you are able to replace your old, worn-out hangers with new ones.

Whether you are making use of single or double traverse rods, it is first necessary for you to detach the panels on the drapes from the corner from the bracket to expose the traverse rod on the side which has the Curtain Hangers broken. By lifting the hooks, continue to remove the drapes from the corner of bracket.

As soon as you might be completed with their removal, now detach the hooks in the hangers and set the drape in one side to expose the hardware, rod and ring hangers. To avoid the loss of any pins, which may well be stuck inside the seams on the pleats, fold the drapes and hold them aside. Nonetheless, in case you believe that your curtains need some cleaning, meticulously eliminate the hooks and from the pleats.

The subsequent step is usually to unlock the rod, which could be completed by pressing down the tab on the pulley situated around the either side in the rod. This step aids you to easily slide sling hanger off the rod. Now slide the hanger more than the housing and through the hole offered, lift it out cautiously.

By means of the open end, take away the broken plastic hangers and replace them with new ones. Now fit the new hangers via the finish in the rod as well as the slot. Just make certain that the hanger faces inside the forward direction.

Once the entire method is more than, reattach the drapes or curtains on the traverse rods by inserting the hook finish from the s-shaped pin, which can be seen around the backside in the pleated drapes.

The identical method could be followed with extra-long traverse rods. Nonetheless, be very carefully even though reattaching the drapes as the s-shaped hooks features a sharp pointed end, which can get poked on your finger.